Smart eyewear OEM/ODM manufacturer · Shenzhen, China +86 19835872450 sales@cynrin.com
CLASS 9 DANGEROUS GOODS · LITHIUM-ION

Shipping smart glasses with lithium batteries, by air and sea

Every unit contains a rechargeable lithium-polymer cell. That moves the carton into dangerous-goods territory regardless of destination: the UN38.3 test summary must exist before the first export, the packing instruction must match how the cell sits with the goods, and air freight adds its own state-of-charge and label rules.

Master export cartons marked and labeled for lithium battery shipment
THE FOUNDATION

UN38.3: the eight tests behind every legal shipment

Section 38.3 of the UN Manual of Tests and Criteria requires lithium cells and batteries to pass eight tests before transport. Evidence is tied to the cell/battery manufacturer and travels with the finished goods.

T.1

Altitude simulation

Low-pressure environment simulating air-cargo hold conditions; checks sealing and venting behavior.

T.2

Thermal test

Repeated high/low temperature cycling to stress seals, separators and electrical integrity.

T.3

Vibration

Sweep vibration across frequencies representing transport vibration profiles on all axes.

T.4

Shock

Half-sine shock pulses simulating handling impacts, applied to cells and batteries as specified.

T.5

External short circuit

Short applied at defined temperature with resistance limits; checks thermal behavior and protection.

T.6

Impact / crush

Mechanical abuse on cells, checking for dangerous thermal runaway under impact or crushing force.

T.7

Overcharge

Forced charging beyond rated limits; validates that protection circuits prevent dangerous failure.

T.8

Forced discharge

Cells forced into reverse-discharge conditions to verify safety margins against misuse.

Aging racks used for battery charge-discharge cycling during production validation
THE TEST SUMMARY

What the forwarder actually asks for

The document most commonly requested is the UN38.3 Test Summary — a standardized summary identifying the cell/battery, manufacturer, test laboratory information and the eight test results, per the UN model format. CYNRIN supplies the cell supplier's summary for the exact cell fitted plus the finished-pack information your shipper needs.

Because the summary is cell-specific, changing battery vendor after certification creates a new documentation path — one more reason the BOM is frozen at PVT, consistent with the certified-unit-equals-shipped-unit rule on the certifications page.

PACKING INSTRUCTIONS

PI966, PI967 or PI970 — which one fits your carton

The IATA packing instruction is chosen by how the battery is shipped relative to the equipment. Finished smart glasses assembled with the cell inside overwhelmingly use one of the first two.

PI967
Batteries contained in equipment

The usual case for finished CYNRIN glasses: cells are installed inside the units. The instruction governs per-package quantity limits, inner protection against accidental activation, and the lithium-battery handling label/mark documentation for the package.

PI966
Batteries packed with equipment

Applies when spare cells/batteries travel in the same package as devices they power — relevant when spare batteries are included as accessories or in service/kits shipments. Additional inner packaging and quantity rules apply.

PI970
Loose lithium-ion batteries

Battery-only shipments (spare cells, warranty replacements sent separately). The strictest of the three for passenger-air carriage; commonly moved cargo-only or by sea, with shipper's declaration requirements.

Parameter (lithium-ion)Small-cell rule landscapeSmart-glasses reality
Cell Watt-hour ratingBelow the small-cell threshold (20 Wh); cells in wearable eyewear are well under the larger-battery regimes.Cell Wh figures are stated on the cell specification and in the shipping documents for the exact BOM.
Package net quantityQuantity and labeling rules differ between the PI and between passenger/cargo aircraft.Carton configurations and unit counts are designed against PI967 limits so master cartons ship without special re-packing.
State of charge (air)Loose/extra batteries generally limited to no more than 30% state of charge for cargo-air acceptance under the rules.Contained-in-equipment shipments follow the applicable equipment provisions; units ship at factory-charge settings aligned to the instruction.
Dangerous-goods documentationShipper's Declaration required for regulated (fully classified) shipments; excepted smaller configurations use lithium-battery marks and documents without the full declaration where permitted.The freight forwarder determines the exact paperwork per booking; CYNRIN pre-supplies test summary, MSDS and packing data so the decision is fast.
Sea freight (IMDG)Sea provisions for lithium cells/batteries under the IMDG Code are generally less restrictive on packaging than air, but UN38.3 remains mandatory.High-volume FBA and distributor replenishment typically moves by sea with the same underlying battery file.
LITHIUM BATTERY MARK

UN number and lithium-battery handling mark on the applicable packages with contact/telephone fields where required.

CLASS 9 LABEL

Class 9 miscellaneous dangerous-goods hazard label on shipments whose packing instruction/quantity requires it.

CARGO AIRCRAFT ONLY

Cargo-aircraft-only mark for packages not permitted on passenger aircraft under the applicable instruction.

UN NUMBER

Lithium-ion batteries ship under UN3480 (loose) or UN3481 (packed with/contained in equipment) as applicable.

HANDLING MARKS

Fragility, moisture and orientation marks plus carton count/weight data matching the packing list.

DOCUMENT POUCH

Test summary reference, MSDS/SDS and shipper paperwork travel with the master-carton documentation.

Mark selection follows the booked packing instruction and mode; artwork is prepared per shipment configuration.

MASTER CARTON

The export document pack

Before the forwarder books space, CYNRIN assembles the file your logistics partner and the destination warehouse expect.

  • UN38.3 test summary for the exact lithium-polymer cell fitted (UN model format).
  • MSDS / SDS for battery and finished goods, issued in English for shipper and importer.
  • Packing-instruction determination (PI966/PI967/PI970) with cell Wh, package quantity and gross data.
  • Carton and pallet specifications feeding the dangerous-goods declaration or excepted-provisions paperwork.
  • Commercial documents — invoice, packing list, HS classification and origin data for customs entry.
  • FBA / retailer alignment — carton and label configuration matched to fulfilment-center inbound expectations.

Operational Incoterms, freight modes and fulfillment routing are on the shipping & logistics page; samples and pre-production shipments have their own rules, summarized on the samples page.

SEA vs AIR

Choosing the mode for replenishment

OCEAN · IMDG CODE

High volume, predictable calendar

Lower freight cost and generally less restrictive lithium packaging provisions than air, with UN38.3 still mandatory. Standard choice for mass-production replenishment, FBA stock building and distributor containers. Door-to-door planning via the Incoterms and forwarder coordination described in logistics.

AIR · IATA DGR

Speed for samples and launches

Fastest for PVT samples, certification units and launch stock, with stricter quantity, state-of-charge and label rules. Express couriers accept lithium-containing shipments under defined conditions when the full document pouch is ready at pickup — missing summaries are the common cause of express refusals.

BATTERY SHIPPING FAQ

Logistics and compliance questions

Which UN number applies to finished smart glasses?
Loose lithium-ion cells/batteries ship under UN3480; lithium-ion batteries packed with or contained in equipment ship under UN3481. Finished glasses with the cell installed inside the unit fall under UN3481 and, in the typical configuration, IATA Packing Instruction 967 (batteries contained in equipment). The final classification is confirmed per booking by the forwarder against the actual package configuration.
Do small wearable cells still need UN38.3 testing?
Yes — UN38.3 applies regardless of size; there is no "small battery" exemption from the test summary requirement. What changes with size are the packaging, quantity and labeling rules, not the underlying obligation. Wearable cells are comfortably inside the small-cell Watt-hour regime, which makes packing simpler but does not remove the test-summary document from the export file.
Who provides the UN38.3 summary — CYNRIN or the cell maker?
The tests are performed on the cell and the test summary originates with the cell/battery manufacturer; CYNRIN collects the summary for the exact production cell, verifies it matches the BOM, and packages it with finished-goods MSDS and packing data into the shipper's document pouch. When your brand specifies an approved alternate cell, that cell's summary is collected before the BOM change is released.
Can we ship spare batteries together with the glasses?
Yes, but that moves the package from PI967 toward PI966 (batteries packed with equipment), with different inner-packaging and quantity rules; battery-only shipments use PI970 and may be cargo-air only. Programs that bundle a spare cell as an accessory declare it at packaging-design time so master cartons meet the correct instruction from the first shipment rather than being re-packed at the forwarder.
What document problems most often delay a shipment?
Three repeat causes: a test summary that does not match the fitted cell's part number, an MSDS older than the forwarder's accepted validity window, and carton marks added by guesswork instead of the booked packing instruction. CYNRIN eliminates the first two by BOM-locking at PVT and issuing current documents, and pre-confirms marks with the forwarder so cargo acceptance is not decided at the warehouse door.
Does Amazon FBA need the battery documents too?
Yes — FBA inbound for lithium-containing products requires battery-specific information and compliant packaging, and dangerous-goods shipments without correct documentation are refused at fulfillment-center receiving. The handover pack is assembled for this: test summary, MSDS, cell Watt-hour data and carton configuration are provided in the format Amazon's inbound and compliance workflows request.

Building the export document pouch for your first container?

List the destination and mode in the RFQ. Logistics and compliance return the packing instruction, marks, documents and timeline before pickup.

Chat on WhatsApp
Your experience on this site will be improved by allowing cookies.