Smart eyewear OEM/ODM manufacturer · Shenzhen, China +86 19835872450 sales@cynrin.com
SHENZHEN FACTORY · ENGINEERING · SERIAL PRODUCTION

Smart glasses manufacturing built for global brands

Since 2018 CYNRIN has built one thing: connected eyewear. Our 20,000 m² Longgang site puts R&D, SMT, assembly, aging, inspection and packing under one roof — so the engineering team that signs off your golden sample is the same organization that ships your volume order. This page maps that floor honestly, including the work we deliberately leave to qualified specialist partners.

  • One accountable program from product definition to export carton
  • Engineering, lines and quality gates co-located on one site
  • Batch traceability from incoming material to shipped serial range
CYNRIN smart glasses assembly line at the Longgang factory
2018Founded — smart eyewear focus from day one
20,000 m²Manufacturing facility, Longgang Shenzhen
300+Employees across engineering and production
50+R&D and engineering professionals
THE PRODUCTION FLOOR, SEQUENCED

Six stations your batch physically passes through

Every shipped lot follows the same spine. Nothing on this list is a purchased "service badge" — each station is a place on the Longgang floor with named owners, and each hands work forward only after its check is recorded.

01

Incoming material control (IQC)

Cells, chipsets, drivers, speakers, hinges, lenses and trims are checked against the approved vendor and specification before they reach a line. Long-lead parts are booked at deposit and held against the program.

Recorded: lot numbers, supplier batch IDs, sample inspection result and disposition — the first link of the traceability chain.
02

SMT placement & PCBA

Dense, small-format eyewear boards are placed, reflowed, AOI-screened and functionally checked. Program setup and first-board verification happen per board revision, never silently across a change.

Recorded: board revision, SMT program version, AOI result and first-article sign-off.
03

Assembly & sealing fit

Hinge build, flex-cable routing, acoustic assembly, lens and trim fit, cosmetic touch and screw stations follow standard work instructions derived from the sealed golden sample.

Recorded: line, date, operator station and patrol inspection (IPQC) findings.
04

Aging & functional test

Completed units dwell on powered aging racks, then pass functional, acoustic, optical, RF and charging stations. Sealed frames undergo the water exposure their IP rating promises — no rating is shipped untested.

Recorded: aging dwell, functional yield and the full method set catalogued in the test catalog.
05

Final inspection (OQC)

Finished units are sampled against the agreed AQL plan for critical, major and minor defects, measured against the golden sample and the approved configuration. Lots fail the gate on evidence, not relationship.

Recorded: AQL inspection report, defect classification and lot disposition — see gate mechanics.
06

Branded packing & warehouse

Approved units are kitted with your manuals, labels, accessories and market-specific carton marks, then staged for FOB, CIF or DDP release with battery documents attached to the shipment file.

Recorded: packed quantity, carton numbers, gross/net weights and the shipping document pack.
THE HONEST BOUNDARY

What is in the building — and what is not

Buyers tell us the most common factory-tour disappointment is discovering, after deposit, that half the "factory" was a subcontractor two districts away. We draw the boundary in writing before any order, because it decides lead time, change control and who answers for quality.

IN-HOUSE AT LONGGANG

Owned and managed by CYNRIN

  • R&D, ID/EE engineering and prototype validation
  • SMT placement, PCBA test and board-level rework
  • Final assembly, sealing fit and cosmetic finishing
  • Aging racks, functional/RF/optical test stations
  • Incoming and final inspection under the AQL plan
  • Branded packing, finished-goods warehouse and booking coordination
QUALIFIED EXTERNAL PARTNERS

Specialist work, disclosed up front

  • Injection molding and mold making for custom tooling programs
  • Lens blank production and prescription lens partners
  • Independent third-party certification laboratories (CE, FCC, CITC and equivalents)
  • Export freight and customs brokerage under your chosen Incoterm

Partners are qualified and audited by our engineering team, and partner work is gated by the same incoming inspection and golden-sample standard. It is never presented as in-house — the facility page uses the same boundary.

WHAT THE MANUFACTURING PROGRAM INCLUDES

Far more than assembly: the work between PO and cargo-ready

Engineering drawing review during design for manufacture
ENGINEERING

DFM review & configuration control

Your concept is reviewed for moldability, assembly, sealing and test access before tooling, and the approved configuration — BOM, board revision, firmware version, trim and packaging — is frozen as the contract standard. The week-by-week process map shows every handoff.

Close view of SMT placement for smart glasses boards
PRODUCTION ENGINEERING

NPI, fixtures & test rigs

New-product introduction builds the line layout, work instructions, test fixtures and golden-sample comparison points before pilot. EVT, DVT and PVT discipline is identical whether the product is a catalog platform or a full ODM co-development.

Powered aging racks holding smart glasses units
VERIFICATION

Gates, aging & reliability

Functional, environmental, mechanical and life testing run at the verification depth the product's claims require — from sweat and drop exposure to hinge cycles and battery aging. Methods live in the reliability catalog.

Branded retail packaging and export carton preparation
FULFILLMENT

Branded packing & market readiness

Retail boxes, manuals, label languages, FBA preparation and destination carton marks are produced to your market file — EU, UK, Gulf or East-Asian label variants included, coordinated with the compliance center dossier.

SEE IT BEFORE YOU BOOK IT

What to watch on a factory tour — in person or on video

A live walk (or a scheduled video tour during your pilot build) answers questions no brochure can: are real boards being placed on-site, are aging racks actually populated, are test stations measuring anything, and can the people on the line answer process questions?

We encourage audits timed to your own pilot run — when the line is configured for your product rather than staged for visitors. The same evidence distinguishes a real manufacturer from a reseller showroom; the 15-point manufacturer verification guide lists exactly what to photograph and ask. Capacity claims can be checked against the four-account capacity method while you stand on the floor.

THE EVIDENCE A SHIPMENT LEAVES BEHIND

Quality you can audit two years after delivery

Forensics, not promises: if a unit returns under warranty, its batch leads back to the incoming lots, board revision, line date, aging record and inspection report. That chain is what allows a defect pattern to become an engineering correction instead of a supplier argument.

Sealed golden sample

The signed, sealed standard fixing appearance, marking, firmware, accessories and packaging; every OQC lot is judged against it.

Lot-level records

Batch traceability links shipped serial ranges to material lots, production date, line and test data — retained against the program.

Change control

No silent component swaps: substitutions are proposed with engineering comparison and applied only after written approval.

After shipment the same loop stays open: structured RMA feedback flows from after-sales support back into process engineering, so field evidence improves the next lot rather than disappearing into a support inbox.

MANUFACTURING FAQ

What sourcing teams ask about the factory

Is CYNRIN a manufacturer or a trading company?
A manufacturer. R&D, SMT, assembly, aging, inspection, packing and the warehouse share the Longgang site, and the company holds the factory lease, tooling relationships and quality records in its own name. Injection molding, lens production, third-party certification and freight are handled by disclosed external partners. The full evidence checklist — certificate holders, tooling ownership, audit questions — is in the manufacturer versus trading company guide.
What is the smallest program you will manufacture?
Catalog-platform orders start at 500 units, branded OEM private-label programs at 1,000 units, and full custom ODM with new tooling at 3,000–5,000 units depending on configuration. The thresholds reflect line and material economics rather than policy for its own sake; the MOQ page breaks each tier down and explains how mixed SKUs are consolidated.
How long from PO to cargo-ready?
Samples ship in roughly 5–15 days; catalog and branded production typically runs 15–40 days depending on program tier, material availability and SKU mix; custom ODM follows a roughly 16-week development calendar with certification running in parallel. Exact schedules for your configuration are on the lead times page and the process calendar.
Can we visit or audit the factory before ordering?
Yes, and buyers should. In-person floor walks and scheduled live video tours are both available, ideally timed during your pilot build when the line is configured for your product. You can inspect SMT setup, aging occupancy, test stations and finished-goods flow, and verify capacity claims against the method shown on the production capability page.
Which parts of the product do you actually make yourselves?
We engineer and assemble in-house: PCBA placement, board test, final assembly, sealing fit, aging, functional/RF/optical test, inspection and branded packing. Injection molding and molds, lens blanks, independent certification testing and export freight are provided by qualified, disclosed partners and gated by our incoming inspection. The boundary is stated in the quotation, never discovered mid-program.
What quality documentation comes with a shipment?
The shipment file includes the AQL final-inspection report against the agreed plan, batch and traceability records, applicable functional and reliability test results, market compliance files (test reports, declarations, labels as scoped) and battery shipping documents where relevant. The complete evidence system is described in the in-process quality guide and the market files in the compliance center.

Bring your product to a factory that builds only eyewear.

Send your brief, drawings or target spec. Engineering responds with DFM feedback, program tier and a schedule built around your market file.

Chat on WhatsApp
Your experience on this site will be improved by allowing cookies.