What category of product is the MT6?
MT6 is an AI camera glasses platform: it captures first-person photos and video through an 8MP camera built into a frame with a published weight of 158g. Its record also lists a 265mAh battery, a 1200mAh foldable charging case, about 7h of reference music playback and a reference charge time of up to 2 hours, which positions it as the portable, case-equipped column of the 8MP camera family.
What does the published 8MP camera mean for image quality?
The 8MP figure is the camera resolution published for MT6 and matches the KY06, CY03, CY05 and MT5 columns; the 13MP tier belongs to other sports platforms outside this table. Megapixels set the capture baseline, while real image quality also depends on the sensor, lens alignment and firmware tuning. CYNRIN therefore confirms photo and video output detail on the configuration sheet instead of quoting imaging numbers absent from the record.
What is the MT6 battery capacity?
The published battery capacity is 265mAh. Within the 8MP table that places MT6 above the 220mAh MT5 and V03-PRO columns and just above the 260mAh KY06, while CY03 and CY05 publish 290mAh cells. Capacity is the onboard energy ceiling rather than a runtime guarantee, because capture frequency, playback volume, wireless conditions and temperature all change the real drain profile of a camera glasses frame.
How does the MT6 charge and how long does it take?
The record publishes a charging case capacity of 1200mAh described as foldable and a reference charging time of up to 2 hours, but it does not publish a charging-method or interface row. CYNRIN therefore does not claim magnetic contacts or a cable type for MT6; the exact charging interface and case-to-frame behaviour are confirmed on the configuration sheet per project rather than borrowed from a sibling column.
What weight, lens and frame options are published for the MT6?
The MT6 record publishes one physical parameter: weight at 158g, the only published weight in the 8MP case-charging table. It does not publish lens options, frame material, temple design, dimensions or colours, and CYNRIN does not fill those gaps from sibling models. Available tints, prescription options and cosmetic finishes are documented on the configuration sheet and confirmed per project and destination market.
How is the MT6 different from the CY03 and CY05 in the same family?
All three publish an 8MP camera, about 7h reference playback and a quoted charging case, but the cells and cases differ: MT6 carries 265mAh with a 1200mAh foldable case and a published 158g weight, while CY03 and CY05 publish 290mAh cells and 1400mAh cases with no weight row. MT6 also publishes no charging interface, so its docking detail is confirmed on the configuration sheet rather than assumed.
What is the minimum order quantity for the MT6?
Catalogue OEM entry for MT6 starts at 500 units, where the published 8MP platform with the 1200mAh foldable charging case is configured with available options and your logo treatment. Branded OEM with fuller logo, packaging and documentation scope typically begins at 1,000 units. ODM work involving structural or engineering changes, such as case modifications, is evaluated separately and typically lands in the 3,000-5,000 unit range.
Can CYNRIN customize the MT6 for our brand and market?
Yes. MT6 runs as an OEM/ODM configurable platform covering logo placement, colourway, lens and accessory selection, packaging structures and documentation scope. Because colours and lens options are not pre-published, the available trim matrix is confirmed against your quantity and destination market, and any structural change to the foldable case or frame is scoped as ODM with its own tooling review.
Which certifications apply to the MT6?
CYNRIN lists CE, FCC and RoHS among its certification capabilities rather than claiming MT6 is certified off the shelf. The specific reports, standards and configuration scope are verified against your destination market and provided on request, because requirements differ between the EU, US and other regions, and because the camera frame plus separate foldable charging case are assessed as the configured product ships.
Can we order samples and what is the lead time for MT6 production?
Samples, including the foldable charging case, are scheduled after the product brief is reviewed, with timing confirmed in writing rather than promised on the page. After deposit, mass production for catalogue and branded orders typically runs 15-40 days depending on configuration, packaging scope and order quantity. The exact schedule, including sample shipment and certification timing, is agreed up front for each MT6 programme.
What does the foldable charging case add to the MT6 package?
The published record describes the case as 1200mAh (foldable), which gives buyers a quoted reserve cell and a folding docking accessory distinct from the non-published cases on KY06 and MT5 and the 1400mAh cases on CY03 and CY05. Foldable mechanics, exact recharge cycles and bundled case accessories are not published, so CYNRIN confirms those details on the configuration sheet per project instead of estimating them.
Does the published 158g weight include the charging case?
The record publishes 158g on a single Weight row for MT6 and does not state whether the measurement covers the frame alone or the frame with accessories, so CYNRIN quotes 158g only as printed and confirms the weighing condition, along with carton and case weights for shipping, on the configuration sheet. No other 8MP case-charging column publishes a weight, which is why the family table shows 158g only in the MT6 column.
How do we start an RFQ or MT6 project with CYNRIN?
Send your target quantity, intended market, required lens or colour configuration and planned sales channel, along with any certification expectations and your interest in the foldable case scope. Engineering maps the MT6 catalogue platform to that brief and replies with the configuration sheet, sample timing, applicable MOQ tier and the certification scope relevant to your destination market, so the 500-unit entry point and any branded or ODM work are clear up front.