What exactly is the CY05?
CY05 is an AI camera glasses model and the same-platform counterpart to CY03. Its published record lists an 8MP first-person camera, a 290mAh battery, a 1400mAh charging case, reference charging within about 2 hours and about 7h music playback. Rather than introducing a new power design, CY05 is offered as a variant for differentiated appearance across markets, channels or portfolio tiers.
Is the CY05 camera different from the CY03 camera?
No published engineering difference exists: CY05 prints the same 8MP camera as CY03 and every other column in the 8MP family. The variant distinction is not a sensor or resolution change, and CYNRIN does not claim imaging behaviour that the record does not publish. Sensor model and video or photo output detail beyond the 8MP figure are confirmed on the configuration sheet if your RFQ requires them.
What battery and charging case does the CY05 publish?
The CY05 record lists a 290mAh frame battery and a 1400mAh charging case, numerically identical to CY03 and the largest case capacity in the family table, above MT6's 1200mAh foldable case. This shared power system is deliberate: both variants use the same core energy design, while their appearance, logo treatment and packaging can be configured separately for different markets.
How long does the CY05 run and take to charge?
Reference music playback is about 7 hours and reference charging time is up to 2 hours, both measured under defined conditions and quoted as reference figures. Real playback moves with volume, capture load, call time, Bluetooth signal and temperature. The physical charging interface is not published in the CY05 record, and standby and continuous recording durations are not printed either.
What visible differences between CY05 and CY03 are guaranteed?
None are guaranteed by the specification record: the published engineering values are identical, and no colours, materials, temple design, lens options or weight are printed for CY05. The model is intended for differentiated appearance, but the actual colourway, trim and packaging differences are configured against quantity and market and confirmed in writing on the configuration sheet rather than asserted here.
Why would a brand buy both CY03 and CY05?
A brand uses the two SKUs to separate shelf positions without maintaining two engineering platforms: the shared 8MP camera, 290mAh cell and 1400mAh case keep performance, service parts and accessory packs aligned, while configured logo, finish and packaging give each model a distinct role for a region, retailer or price segment. That portfolio logic is the published reason CY05 exists as a same-platform variant.
Which colours, lenses and frame materials are available on the CY05?
The CY05 specification record publishes no colours, lens options, frame materials, temple design or weight, so the comparison table marks them Not published rather than borrowing values from V03-PRO or other siblings. Available options are built per project: buyers state the target market and channel, and CYNRIN confirms the tint, prescription, finish and material options on the configuration sheet.
What is the MOQ for the CY05?
Catalogue OEM entry starts at 500 units for the standard platform with available options and logo scope, the same entry threshold as the rest of the family. Branded OEM with dedicated packaging and fuller branding typically starts at 1,000 units. Engineering or structural changes beyond the shared platform are treated as ODM and typically evaluated around 3,000-5,000 units after the brief is reviewed.
Can we customize CY05 differently from CY05's sibling models?
Yes. Logo placement, colourway, lens and accessory selection, case packaging, inserts and documentation can all be configured per variant, which is how the two same-platform models are separated at retail. Tooling-level changes to the frame, electronics or case move the programme into ODM rather than catalogue OEM. The available cosmetic matrix is confirmed against your quantity and market because no trim is pre-published for CY05.
Which certifications cover the CY05?
CYNRIN lists CE, FCC and RoHS as certification capabilities and does not claim CY05 is certified for a specific market on this page. The applicable reports, standards and exact tested configuration are verified for the destination region and provided on request. Because CY05 can be trimmed differently from CY03, certification scope is confirmed against the specific configured product rather than assumed from the shared platform.
What are the sample and lead-time arrangements for CY05?
Samples are scheduled after the variant brief, including any cosmetic scope, is reviewed, and timing is confirmed in writing. Mass production typically runs 15-40 days after deposit, varying with quantity, packaging, finish configuration and documentation needs. Sharing the CY03 core can simplify sample validation, but the written schedule is issued per programme rather than copied from the sibling model.
Does CY05 use a magnetic or Type-C charging interface?
The charging interface is not published for CY05; the record states the reference charging time of up to 2 hours and the 1400mAh charging case, but it does not name the connector or contact type. CYNRIN therefore does not assign the magnetic method printed on KY06 and MT5 or the Type-C printed on V03-PRO to this column, and confirms the interface in writing per project before tooling.
How do we start a CY05 variant programme?
Send the target quantity, destination market, intended differentiation from CY03 (finish, logo, packaging or channel role) and the lens or colourway scope you need. Engineering maps the shared platform to that brief and replies with the configuration sheet, sample timing, the applicable 500-unit catalogue or 1,000-unit branded MOQ tier and the certification scope, starting the programme at the Define gate.