Selling smart glasses in the European Union
CE marking is a manufacturer's declaration, not a license. For Bluetooth smart glasses it is built on the Radio Equipment Directive, harmonised standards, a technical file, GPSR operator duties — and a named economic operator inside the EU. Here is exactly what your brand must hold before the first pallet lands.

Five rungs between your factory and an EU shelf
Each rung produces a document. Missing one does not stop the vessel — it stops the goods at customs or triggers a marketplace listing removal.
RED 2014/53/EU compliance
Smart glasses are radio equipment. The Radio Equipment Directive requires safety/health (Art. 3.1a), EMC (3.1b) and effective radio-spectrum use (3.2), evidenced through the harmonised-standard families EN IEC 62368-1, EN 55032/55035 and EN 300 328, depending on configuration.
Since the delegated act under Article 3(3), connected products also carry cybersecurity requirements on network protection, personal data and fraud — the practical route is the EN 18031 standard family, covered separately in the EN 18031 guide.
RoHS & REACH declarations
Frame plastics, lens coatings, solder, adhesives and the battery cell fall under RoHS restricted-substance rules and REACH SVHC screening. Declarations are compiled per finished SKU from supplier evidence collected across the controlled supplier base.
Underlying material evidence already exists for shared CYNRIN reference platforms; only the SKU-specific declaration is compiled for your program. Custom-tooled materials are tested at the DVT gate and kept in the technical file.
GPSR economic-operator obligations
The General Product Safety Regulation applies since 13 December 2024 alongside sector rules: an EU-based responsible person, traceability data on the product, a risk-assessment file, a portal for accident reporting and cooperation with national authorities must all exist before sale.
For products with CE sector law — like radio glasses — GPSR fills the gaps the sector law does not cover, particularly consumer-facing safety governance. Brands selling online into the EU need this in place even if they never physically import themselves.
EU Declaration of Conformity
Your company — as manufacturer of record — signs a single DoC referencing every applied directive and harmonised standard, identifying product, brand and the person with power to bind the company. CYNRIN drafts it; the brand signs and dates it.
The DoC must accompany the product (digital delivery is permitted under the rules), and it names the standards editions actually used, so it is regenerated whenever the configuration changes materially.
Technical file, labels & producer registration
Schematics, BOM, block diagrams, antenna spec, risk analysis, test reports, supplier declarations, label artwork and localized manual sections form the Technical Construction File retained for ten years. Importers additionally carry out national WEEE and battery producer registrations.
The TCF is what a market-surveillance authority actually asks for in a query. CYNRIN hands over an indexed pack built for exactly that exchange — see what's inside in the certification overview.
The EU operator chain for your product
EU law identifies several economic operators. Most DTC brands are simultaneously manufacturer (brand owner) and importer, even when a 3PL handles the goods.
Your brand
- Owns design, DoC and technical-file responsibility
- Holds certificates in its own name
- Ensures series production stays conformant
- Fielded by surveillance authorities
Authorised rep or importer
- Name and address on the product or packaging
- Holds the DoC/TCF available for authorities
- Cooperates on recalls and risk measures
- Required for CE goods by non-EU manufacturers
Retailers, Amazon, 3PLs
- Verify CE mark, DoC and operator details exist
- Must not sell products they know are non-compliant
- Pass safety notices up and down the chain
- Marketplace operators carry direct duties under GPSR
The practical consequence: a non-EU brand selling FBA or DTC into the EU must contract an authorised representative or sell through an EU importer, and that entity's details must appear on the product. This is paperwork, not engineering — but it cannot be backdated after customs asks. CYNRIN supplies the technical data the representative needs; the appointment itself is a brand-side contract.
What an EU Declaration of Conformity must contain
Unique model/type/batch or serial number, product description and trade name exactly matching the label and technical file.
Legal name and full address of the manufacturer and, where applicable, the authorised representative established in the EU.
A statement that the declaration is issued under the sole responsibility of the manufacturer and that the object described is in conformity with the applicable Union harmonisation legislation.
References to the applied directives/regulations — at minimum RED 2014/53/EU, RoHS 2.0 and the radio equipment obligations — with amendments.
Exact harmonised standards (with edition dates) used: EN IEC 62368-1, EN 55032/55035, EN 300 328 and the EN 18031 family where cyber evidence is claimed.
Identification number and certificate reference where a notified body participated; for the standard self-certification path this field is typically "not applicable".
Place and date of issue, name and function of the signatory, signature — binding the legal entity that places the product on the market.


The EU pre-shipment checklist
Test reports
RF, EMC, safety and chemistry from an accredited lab, product name matching your SKU.
Cybersecurity evidence
EN 18031-family assessment against the firmware configuration you actually ship.
Signed DoC
Dated, standards editions listed, signed by your company — delivered with goods.
Technical file
Indexed TCF retained ten years, held available via your EU representative.
Operator details
EU responsible person's name and address printed on product/packaging/manual.
Producer registration
National WEEE and battery registrations completed by the importing entity.
CE labeling
CE mark, model, WEEE crossed-bin mark and battery marks in label artwork files.
Manual & safety
Localized user manual with required RF notices and safety instructions in market languages.
Questions before the first EU order
Do smart glasses need a notified body to get CE marking?
Can our Hong Kong or China company be the manufacturer on the DoC?
Does GPSR replace the RED for smart glasses?
Do we need WEEE and battery registration even for small volumes?
What languages must the manual and safety notices be in?
How does UKCA relate to the EU package?
EU launch on the roadmap? Start the file at DVT, not at customs.
Send your target member states and channels. We return the standards editions, representative data requirements, label pack and a week-by-week certification schedule.
