Smart eyewear OEM/ODM manufacturer · Shenzhen, China +86 19835872450 sales@cynrin.com
Smart Glasses Technology

How To Customize L1 Pro Smart Glasses For A Brand Programme

The catalogue publishes five numbers for this model and one more piece of information inside the product name itself. The name carries a case designation…

By CYNRIN Engineering & Sourcing Team/ May 28, 2025/ 15 min read
How To Customize L1 Pro Smart Glasses For A Brand Programme

The catalogue publishes five numbers for this model and one more piece of information inside the product name itself. The name carries a case designation, which tells a buyer at the outset that this is the case-equipped edition of the thirteen megapixel camera class rather than a bare frame. The five numbers are the camera class, the frame cell, the charge ceiling, the rated use and the case capacity: thirteen megapixels, 290 mAh, two hours or less, about seven hours, and a charging case of 1400 mAh.

That is the whole published set for the L1 Pro, and it is narrower than the published set for most other camera models in the range. For a private label programme the narrowness cuts both ways. It makes an accurate product description easy to write, because there is little published detail that has to be qualified or withdrawn later. It also means that most of what a brand programme actually needs — how the frame charges, what it weighs, what colours it exists in, which documents name it — has to be requested in writing, and the request becomes part of the programme rather than an exception to it.

This article walks the L1 Pro programme in the order the decisions bind, for the two people who have to answer for it: the buyer who owns the commercial outcome and the compliance owner who owns the file. Nothing here quotes a price, a minimum order quantity, a lead time or a certificate number, because none of those is published for this model or for any other in the range, and a programme that builds its plan on an assumption about them is a programme that discovers them late.

The L1 Pro published rows and what each one fixes

What the catalogue publishes for the L1 Pro, and what it does not

Five rows carry this model's specification and the product naming carries a sixth fact. The camera sits in the thirteen megapixel class. The frame cell is 290 mAh. The charge ceiling is two hours or less. The rated use is about seven hours. The charging case is 1400 mAh. And the product is listed as the case-equipped version of the model, which is why the designation on the artwork cannot be a bare model string: the box, the file and the packing list all have to carry the configuration, because the configuration is part of what the model is called.

The class matters commercially because it is the top of the published camera range. Three models sit in the thirteen megapixel class — the L2 Utral, the S7 and the L1 Pro — against eight models in the eight megapixel class, and eleven camera models in the catalogue altogether. A buyer comparing tiers is comparing three names, not two, and a page that describes this model as belonging to a group of two is a page with a factual error on it.

Two published figures on this model are shared with neighbours in the range, and both shared figures are worth knowing because they tell the buyer where the specification is common and where it is not. The 290 mAh frame cell is published for the L2 Utral and the CY03, and the CY05 as well. The 1400 mAh case is published for the CY03 and the CY05 as well. The one case decision in the catalogue that is genuinely open is on the L2 Utral, which publishes two capacities, 900 mAh and 1400 mAh. On this model the case is fixed at one published capacity, so the buyer is not choosing a configuration here — the buyer is deciding what to do with the configuration that exists.

The row that causes most of the friction on this model is the one that is missing. This model has no charging method and no charging interface row in its catalogue entry. It is one of four camera models in the range where that row is absent, and the practical consequence is specific: a programme cannot assume that the customer can charge the frame from a cable, because the interface that would make that possible is not documented. The same class contains a model whose Type-C interface is published, and on that model the case can be treated as a top-up accessory. On this model that treatment is conditional on an answer the catalogue does not contain.

There is one more absence with a commercial dimension. For this model the catalogue publishes no feature line at all — no marketing descriptor of any kind, where other camera models carry one. The consequence for a brand programme is that no descriptor on a private label page can be inherited from the catalogue. Every feature claim has to be traceable to a specification row or to a test report, and the difference between the two is the difference between a claim that survives a customer question and one that does not.

Beyond that, the unpublished set is longer than the published one: no sensor model, no field of view, no video format, no frame rate, no frame weight, no ingress marking, no colour list, no radio version, and no certification row naming this model specifically. Weight deserves its own note, because it is the figure most often borrowed by accident. The only weight published anywhere in the catalogue belongs to a different model — 158 g for a folding case model — and it cannot be used as a proxy for this frame. A programme that lists a weight it has not measured is publishing another product's number.

The practical response to a narrow published set is not to fill it with inference. It is to convert each gap into a line on a written request, because the request list is short, specific and answerable, and it is also the list that a supplier's due diligence will eventually be judged against.

Which customisation question the L1 Pro brief turns on

AI-generated photograph illustrating how to customize l1 pro smart glasses for a brand programme — image 1 of 3

Step one: the case, and the interface the catalogue does not give you

The case is the only published accessory on this model, its capacity is fixed at 1400 mAh, and the product designation states that the case is part of the model. That makes it the first decision, and the reason it binds early is not the accessory itself but what the missing interface row implies for it.

The order of the decision matters. The obvious first question — is the case in the box or an accessory? — is actually the second one. The first question is how the frame charges at all. Until that is answered, the case cannot be treated as a separable accessory, because on a model with a published cable interface a case is a convenience and a top-up, while on a model with no published interface the case may be the only documented charging route the customer has. A programme that treats the case as optional on the strength of an assumption about a cable interface is making a decision on an unpublished fact.

What to ask, then, is a short and concrete list. Ask what interface the frame charges through. Ask whether the case charges the frame cell directly or the cell inside the case first and the frame from there, because the two architectures produce different accessories and different replacement behaviour. Ask for the case's own input interface, its charge time, its weight and its dimensions, and whether it carries a battery indicator. Ask whether a case-free configuration of this model exists as a production option at all, given that the designation names the case version and the catalogue lists one configuration. Ask whether a spare case can be bought separately, in what capacity, and on what terms, because a case in the box is eventually lost and a customer who cannot replace it needs a route to a working product. And ask what transport documentation covers the second cell in the shipping configuration the programme intends to use.

The freight dimension is where this stops being a product question. The case holds close to five times the capacity of the frame cell, so the majority of the energy in the box sits in the accessory rather than in the frame. A second lithium cell in every unit changes the packed weight, the freight class, the packaging cavity and the transport paperwork, and the artwork has to be drawn around the accessory rather than the other way round. The AI camera glasses charging case options analysis covers the accessory economics and the shipping weight breakdown covers the arithmetic on the parcel side; both matter more on a model whose accessory is the larger of the two batteries.

The trade-off between the two configurations is straightforward once the interface answer is in hand, and it is a genuine trade-off rather than a preference. A case in the box gives the customer a complete kit on delivery, one stock profile and one artwork version, and it carries the heavier parcel and the full transport file. A case sold as an accessory gives a lighter parcel and a flexible accessory line, but it creates two configurations, two artwork versions and two stock profiles, and it puts the customer's ability to charge at the mercy of the interface answer. The case for asking the interface question first is that the answer decides which of those two programmes the buyer actually wants.

AI-generated photograph illustrating how to customize l1 pro smart glasses for a brand programme — image 2 of 3

Step two: the brand layer and the order that saves a production cycle

The brand layer for this model is the same as for any other camera product in the range: the Bluetooth device name, the logo, the temple shape, the colour, the packaging, the system language and interface, and the firmware. What differs is which of those the catalogue can answer. For the L1 Pro it answers none of them, so each one is a request, and the sequence in which they are requested determines how many production cycles the programme spends.

Start with the Bluetooth device name, because it is embedded in firmware and it then appears in the pairing instructions, on the packaging, in the conformity file and in every support ticket that will ever be raised about the product. A name that changes after artwork is approved is not a naming inconsistency, it is a firmware revision and a reprint. Move next to the logo and the temple shape, because both are constrained by the mould and the constraint has to come back from the factory in writing before the artwork is approved. Then colour, which has to exist in the tooling for this specific model. Packaging comes last, because the box contents depend on the case decision taken in the previous step. The OEM ready brand guidelines note covers the step where the hardware pushes back on the identity, and the model readiness overview sets out where the range's own documentation sits.

Two questions carry more weight on this model than the sequence alone suggests. The first is colour, and the reason is specific: the catalogue publishes no colour list for the L1 Pro, and it publishes none for the thirteen megapixel class as a whole. A colour that exists on the eight megapixel models may not exist in the tooling for this one, so a colour assumption carried over from another model is an assumption about a different mould.

The second is the platform question, and it is the one most often answered wrongly because the published figures make it look answered. The catalogue publishes the same 290 mAh cell figure for the CY05 and the CY03, and the L1 Pro and the L2 Utral, and the same 1400 mAh case capacity for the CY05 and the CY03, and the L1 Pro. That is a shared specification row. It is not evidence of a shared colourway, a shared mould, a shared firmware branch or a shared accessory tooling, and none of those follows from it. Whether the platform underneath is common enough to amortise tooling across models is a factory question, and it belongs in the request list with the answer in writing and the answer attached to the file. The red flag to watch for in a reply is a shared specification being offered as proof of a shared programme, because that is the point at which a buyer believes an amortisation that has not been established.

AI-generated photograph illustrating how to customize l1 pro smart glasses for a brand programme — image 3 of 3

Step three: the file, the box and the sample you approve against

The conformity file is assembled, not inherited. The catalogue's certification material is company-level and its text carries no certification row naming this model, so the file a programme submits is built from documents it requests, each of which has to name the model and the configuration. The certification checklist sets out the document set a programme assembles; the ones that matter most here are the test reports, the component and module list, the cell documentation for the 290 mAh frame cell and for the 1400 mAh case cell, the marking artwork, the instructions and the technical file index. The export documentation checklist covers the paper that travels with the goods, and how the commercial structure around a brand programme is normally documented is covered separately on our OEM ready pricing tiers page.

The designation is what ties those documents to the goods. The catalogue's own string for this model, the one that carries the case configuration, is the natural baseline for the technical file, and whatever name the programme decides to put on the artwork has to be reconciled with it before either is approved. A file that names a model one way and a carton that names it another is a discrepancy that surfaces at the point where it is most expensive to correct, and correcting it means reissuing documents rather than relabelling a box.

The box contents follow from the decisions already taken. For a camera model with a case in the box, the list is the frame, the case, the cable that charges the case, a printed quick start in the market language, a warranty card, the market leaflet, and any accessories the model actually has rather than any a template would suggest. The list has to be per market, because the warnings, the language and the operator details are, and each additional market multiplies the packaging SKUs the programme has to hold. The sport smart glasses packaging options note covers how features land in the box, and the Bluetooth audio glasses box checklist covers the item list in general.

The sample is where the programme either holds or loses, and it has to be approved against a written specification rather than against a good impression: the designation, the camera class of thirteen megapixels, the 290 mAh cell, the charge ceiling of two hours or less, the rated use of about seven hours, the 1400 mAh case, the colour, the box contents, the marking, the firmware version, and the logo placement with its dimensions and finish. The L1 Pro specification list is the honest baseline for what is known before the unit arrives, and the sample before bulk notes cover what to check on the unit itself.

Two of those approved lines deserve a harder look than the rest. The camera class is the top of the published range, so a customer reading the page will treat thirteen megapixels as a quality statement whether or not the page says so, and the catalogue publishes no sensor model, no field of view, no video format and no frame rate to support anything wider. A programme can state the class and nothing beyond it; a programme that wants to differentiate on it has to obtain the evidence, either from a sample tested in the condition a customer creates or from a test report that names the model. The runtime figure has the same shape of problem. About seven hours is a point rather than a range, so the programme should ask what the camera was doing during the measurement, whether the radio link was active, and whether the figure came from one unit or from a batch — and then record the condition beside the number on the page, because a bare figure invites the customer to supply a condition of their own.

The L1 Pro private label review sheet

The six questions to settle before you commit

  1. How does the frame charge? The interface is not published for this model, so the answer decides whether the case is a bundled accessory or a separable one, and the question comes before the box contents decision.
  2. Does a case-free configuration exist as a production option? The designation names the case version, so this has to be confirmed rather than assumed, and the answer changes the stock profile and the artwork plan.
  3. Which colours exist in the tooling for this model? No colour list is published for the L1 Pro or for its class, and a colour from another model is a different mould.
  4. Is the platform common enough to amortise? The shared 290 mAh and 1400 mAh figures are shared specification rows, not proof of a shared programme, and the reply needs to be in writing.
  5. Which documents name this model and this configuration? Test reports, the component and module list, the cell documentation for the frame and the case, the marking artwork, the instructions and the technical file index.
  6. What may be claimed about the camera? The class is published and the behaviour is not, so the claim has to stop at the class or rest on evidence the programme has actually obtained.

Those six cover the decisions, but four positions stay open whatever they decide, and they are worth keeping on one page because they are the items that are discovered late: the frame weight, which has to come off a unit because the catalogue publishes no weight for this model; the ingress position, which carries no marking and therefore supports no durability claim; the radio version, which is unpublished for every camera model in the range; and the certification row, which the programme builds from the documents it requests rather than reads off a catalogue line.

What the catalogue fixes and what the programme has to settle

The matrix above is the summary a buyer and a compliance owner should agree on before the first order. Each row pairs what the catalogue publishes with the single item that closes the gap beside it, and the two open positions in it — how the frame charges and whether the case ships in the box — are closed by a decision rather than by a document, which is why they have to be taken before the artwork rather than after it. The stage sequence around a brand programme of this shape, including where the supplier conversation belongs, is set out in our note on partnering with a factory.

On this model, our position is narrow and deliberate. We publish the thirteen megapixel class, the 290 mAh cell, the charge ceiling of two hours or less, the rated use of about seven hours and the 1400 mAh case, because those are the rows the catalogue carries for the L1 Pro. We do not publish a weight, an ingress marking, a colour, a radio version, a charging interface or a certificate number for this model, because the documentation does not contain them. We do not treat a shared cell figure as proof of a shared platform, and we do not treat the case as a separable accessory while the charging interface for the frame is still an open question.

Tell us the target market, the volume and the configuration you are considering, and we will tell you which of the six items above are defined today and which have to be requested. The platform options are on our OEM ready platforms page, and the camera range this model belongs to is on the AI camera glasses page.


Related reading

Chat on WhatsApp
Your experience on this site will be improved by allowing cookies.